Specifications

9
PROGRAMMING CONVENTIONS
• All options set while in Programming
Mode are stored in default memory,
and will be retained even if the
scanner is powered-down.
• Settings are stored on a first-in, first-out
basis. The last programming label
scanned for a given option is the
setting stored in memory. For ex-
ample, if a programming label which
sets the baud rate at 9600 is scanned,
followed by a label which sets the
baud rate at 19,200, the scanner will be
programmed with a baud rate of
19,200.
• Only labels included in this manual
will be accepted as valid programming
labels. Labels which attempt to set
features not implemented in a
scanner’s software revision will be
rejected as invalid. Programming
labels which are not printed in accor-
dance with industry standards may also
be rejected.