Specifications

Compact 3-channel Mixer
The KS-T2000 is a compact 3-channel mixer that is small
and light enough to go anywhere. This product is made
and guaranteed by Kamesan and is ideal for all audio
applications in professional broadcast and film work.
Camcorders are shrinking but that doesn’t mean audio
requirements are getting any less demanding. Despite
being one-third smaller and about one pound lighter than
any comparable mixer, the Kamesan KS-T2000 offers all the flexibility you’ll need to engineer precise location sound. True
‘Pack and Go’ design. At first sight, a 3-in / 2-out configuration does not appear to be a very comprehensive mixer specification.
But on location, ease-of-use and adaptability count as the most valued features. You need to interface with varied signal
levels, provide multiple feeds, and cope with awkward working conditions. Attention to smallest design details in the
KS-T2000 has resulted in a mixer that can be relied on to excel in every situation.
KAMESAN
KS-T2000
AUDIO MIXERS
354
PHOTO - VIDEO - PRO AUDIO
Accommodating Inputs
◆ 3 switchable XLR-balanced mic/line inputs
with 48v and A-B (12V) phantom powering.
◆ A variable input sensitivity control adjusts
the input amplifier gain to optimize its
amplification for any level, from a hot
condenser to a low output ribbon mic.
◆ Inputs will match a wide variation in line
signal levels. This means that the normal
physical position of the main channel faders
can be 'trimmed' to be at 2/3 rotation –
providing adequate rotation range to 'ride'
actual variations in signal levels.
◆ Switchable 160Hz high pass filters eliminate
most low-frequency noise problems.
◆ Separate left / right output switches route
the signal to the main faders and outputs.
Versatile Outputs
◆ To achieve such a compact size, a single
meter is provided though the mixer has full
stereo capability.
◆ The transformer-balanced XLR outputs,
can drive at a professional line level
(+4dBm) or can be switched down to a low
mic signal level. (-60dBm).
◆ Two RCA connectors for connection to a
consumer camcorder’s mic input.
◆ Low channel crosstalk and output isolation
allow the mixer to be configured for multi-
ple feeds as the situation demands.
◆ 1kHz tone oscillator provides a useful cali-
bration signal.
FEATURES
Versatile Monitoring
◆ Both headphone output and metering can
be switched to left or right outputs, or to a
mono mix of both. When used for
multi-mono applications, one of the main
outputs can be designated as a separate live
feed and monitored independently.
Exceptional Ease Of Use
◆ The side panel reveals just how convenient
operation is. Only the three main and
monitor faders have tall knobs. It is virtu-
ally impossible to ‘knock’any of the other
controls inadvertently during operation.
◆ Even the main faders have been located on
the side of the mixer allowing the operator
to set and forget – a useful feature when
inexperienced operators use the mixer.
◆ Wide knob spacing means that the channel
fader provides for an easy grip under all
conditions.
◆ An all-weather case allows the mixer to be
slung around the neck or shoulder and
operated beneath a transparent cover
under all conditions.
◆ The KS-T2000 runs five hours on four AA
batteries. Higher voltages can provide
higher output levels.
◆ Alternatively, the KS-T2000 will accept and
regulate any external DC supply in the
range of 10 to 15-volts.
KS-107
Lip Checker
A unique product,the KS-107 helps to track and eliminate
broadcast signal time differences between audio and
image signals and also multiple audio signals. At
the receiving site, audio is easily captured via
a microphone or direct line connection.
Video bursts are detected directly from a
monitor screen using an exclusive image
probe,which is manually pointed at the flashing
image on the monitor. The calculated delay is displayed on the unit’s large LCD to an
accuracy of within one millisecond,allowing the operator to make necessary adjustments.