Specifications

Series 9000E Bar Code Scanner/Decoder
6-4
HSTARTCHR xx Host Start Character (open)
HSTOPCHR xx Host Stop Character (close)
Example: >:HSTARTCHR CTLO<enter>
>:HSTOPCHR CTLC<enter>
Character that specifies the start of software gate is CONTROL O.
Software gate stop is specified as CONTROL C.
COMMAND FUNCTION
ACKT ACK NAK timer (0-995 Msec)
DCT Data Change timer (0-30000 Msec)
GDT Gate Debounce timer (1-999 Msec)
GTV Gate Timeout Value (1-30000 Msec)
Example: >: ACKT 100<enter>
Sets the time delay between resending codes at 100 milliseconds.
COMMAND FUNCTION
MASTERON Master/Slave option on
MASTEROFF Master/Slave option off
Example: .:MASTERON
Turns on the Master/Slave option.