Specifications

HOST PROGRAMMING
6-3
COMMANDS
Following is a list of commands and their functions.
COMMAND FUNCTION
MODECONT Continuous Read mode
MODEDCB Data Change buffered
MODEHARD Hardware Gate mode
MODESOFT Software Gate mode
MODEDCT Data Change with timer
Example: >:MODEHARD <enter>
Selects the Hardware Gate mode for scanning and transmitting code
data.
COMMAND FUNCTION
TRKON Beam tracking turned on
TRKOFF Beam tracking turned off
Example: >:TRKON<enter>
Laser beam will turn on when a gate signal is received and turn off when
the gate is closed.
COMMAND FUNCTION
GTXREAD Transmit on Read
GTXCLOSE Transmit on Close
Example: >:GTXCLOSE<enter>
Sets the data transmission to occur on a gate close or a good decode.
COMMAND FUNCTION