Specifications

Series 9000E Scanner/Decoder
5-18
%DL6% "012345"
%DM2,6% "12345"
%DZR11% "00012345678"
%DSL11% "012345678__"
(the label followed by two spaces)
Literal formatting information is transmitted from the port exactly as
entered. Literal messages have a maximum length of sixty characters.
%D% will send the message out to the port exactly like it was decoded.
PAGE 3 - HOST PORT FORMATTING
Purpose of Screen:
Allows the user to set the data transfer parameters between the Series
9000E Bar Code Scanner/Decoder and the host computer available
through the Host Port.
HOST PORT PARAMETERS SCREEN
COM HARDWARE PROTOCOL: RS 232
COM BAUD RATE: 9600
COM PARITY: NONE
COM DATA BITS: EIGHT
COM STOP BITS: ONE
RTS/CTS FLOW CONTROL: NO
COM SOFTWARE PROTOCOL: NONE
COM ECHO/PASS-THROUGH: NO_ECHO
TRANSMIT ON ANY NO READ: YES
TRANSMIT ON ALL NOREADS: YES
TRANSMIT ALGORITHM ID: NO
TRANSMIT READ DIRECTION: NO
START OF MESSAGE STRING:
END OF MESSAGE STRING: <CR><LF>
GOOD COMPARE STRING: GC
NO COMPARE STRING: NC
SCANNER ID STRING:
FIELD DELIMETER STRING: +
INTERCHARACTER DELAY: 0 (0 - 999 msec)
KEYS: SPACE=TOGGLE+ BKSPACE=TOGGLE- <CTRL-U>=LAST SCREEN