Specifications

SIGNAL INTERFACES
4-7
PIN NAME DESCRIPTION DIRECTION
1
-12VDC
-12VDC Power
Input/Output
2 GND Common Ground
3 GC Good Compare Output
4 NC No Compare Output
5 Reserved*
6 +12VDC +12VDC Power Input/Output
7 GND Common Ground
8 GND Common Ground
9 GR Good Read Output
10 NR No Read Output
11 GND Common Ground
12 O/D Digital Output Output
13 Gate Gate Input Input
14 PBC Push Button Compare Input
15 +5VDC +5VDC Power Input/Output
*NOTE: DO NOT MAKE ANY CONNECTION TO THIS PIN.
Pin 1 -12 VDC INPUT/OUTPUT - Alternate input power connection to
the Series 9000E Scanner/Decoder. -12 VDC + 5% @ 300 mA.
required. -12 VDC available at this pin when power connector is
used.
Pin 2 COMMON GROUND - Ground connection common to all
signals.
Pin 3 GOOD COMPARE - User programmable TTL level output pulse
from Series 9000E Scanner/Decoder on each code read that
compares with a compare buffer entry (open collector on some
models).