Specifications

Series 9000E Scanner/Decoder
4-2
1 N/C No Connection
2 TXD Transmit Data Out
3 RXD Receive Data In
4 N/C No Connection
5 GND Common Ground
6 N/C No Connection
7 N/C No Connection
8 N/C No Connection
9 N/C No Connection
Pin 2 TRANSMIT DATA - Data Transmitted from the SERIES 9000E
SCANNER/DECODER to the local programming terminal.
Transmission format is serial ASCII, 1 Start Bit, 8 Data Bits, No
Parity Bit, 1 Stop Bit. Baud rate is set at 9600.
Pin 3 RECEIVE DATA - Data transmitted from the local programming
terminal to the Series 9000E Scanner/Decoder. Transmission
format is serial ASCII, as above.
Pin 5 COMMON GROUND - Ground terminal common to both
Transmit and Receive Data Lines.
HOST PORT
The Host Port is designed to provide RS-232, RS-422, or optional RS-
485 communications to a host computer or other intelligent peripheral
device. The type of communications used is user-programmable and is
selected on Page 3 of the Programming Menus. When selecting RS-
232