User`s guide

R44-1430 5
CONTROLS & INDICATORS
The descriptions on the following pages detail the function of the
controls and indicators for the HS1250. Note that two of these items, the
speaker and volume switch, are located beneath the scanner's top cover.
VOLUME SWITCH
While the scanner is in Normal Mode and the green lamp is on dim,
you can easily change the volume on the HS1250 scanner by pressing
the switch. The scanner has three volume settings available. When
you press the switch, the scanner sounds a tone three times at the
new volume setting. Each time you press the switch, the scanner
sounds the next highest volume until it reaches the highest volume.
After reaching the highest volume, pressing the switch again will
return the volume to the lowest level.
When the scanner is turned off, the volume setting you selected using
the switch will be lost. To change the volume permanently, use the
Volume Selection labels in the Programming Kit (R44-1340).