User`s guide

32 HS1250 User's Guide
ELECTRICAL SPECIFICATIONS
USE ONLY POWER SUPPLY (P/N 8-0133) OR OTHER PSC AP-
PROVED POWER SUPPLY.
The AC/DC Power Supply provides three dc voltages to the HS1250 ;
+12 volts, -12 volts and +5 volts. Typical current draw is:
+12vdc ...................................315mA (normal operation)
...............................................665mA (during start-up)
-12vdc ....................................45mA
+5vdc .....................................230mA
Typical power consumption is approximately 5.5 watts during opera-
tion, 9.7 watts during start-up and 4.4 watts in Sleep Mode.
INPUT POWER
The HS1250 scanner receives DC power from an external power
supply.
EXTERNAL POWER SOURCE
90- 265 VAC 47 - 63 Hz < 10.0 Watts
AC TO DC POWER SUPPLIES
HS1250 uses one power supply equipped with an IEC power cord that
matches your country's requirements. This unit accepts all of the
following line voltages.
COUNTRY AC VOLTAGE
Australia -------------------------------- 240
Benelux--------------------------------- 220
Canada ------------------------------ 115/120
France ---------------------------------- 220
Germany -------------------------------- 220
Italy ----------------------------------- 220
Japan ---------------------------------- 100
Mexico ------------------------------ 115/120
Scandinavia ------------------------------ 220
Spain ---------------------------------- 220
United Kingdom --------------------------- 240
United States -------------------------- 115/120