Specifications

Network and Dialup
Product Reference Guide 2-23
Network and Dialup
To change the Network and Dialup connection settings, complete these steps:
1. Select
Start > Settings > Network and Dialup Connections.
Figure 2-16. Changing the Network & Dialup Connection Settings.
2. Double-tap the connection to view or change the settings. The
CISCO1 item shown as an example can vary, depending on the radio
installed and the number of connections.
3. Complete the two tabs as shown in Figure 2-16:
•
IP Address: Select DHCP or set static IP settings.
•
Name Servers: If using static IP, set DNS and WINS servers.