User`s guide
Table Of Contents
- Table of Contents
- Introduction
- Product Overview
- Manual Overview
- Operational Overview
- Duet Scanner Controls
- Connectors
- Sleep Mode
- Unpacking
- Verifying Scanner Operation
- Countertop Installation
- Connecting the Scanner
- Troubleshooting
- How To Scan
- Customizing Your Scanner's Operation
- Routine Maintenance
- Appendix A - Specifications
- Appendix B - Regulatory Agency Information
- Stand Installation Template
26
Duet
™ Scanner
To use the scanner in Fixed Mode, place the scanner into the stand.
Make sure it is seated securely. In the Fixed Mode, the scanner can
read bar codes either in the sweep or presentation mode to accom-
modate different user styles.
Sweep Scanning
To perform a sweep scan, move (sweep) the product, with the bar
code facing the front window, laterally through the scan volume. As
shown in Figure 13, the scan volume for fixed scanning extends
approximately 9 inches (23 cm) in front of the scan window.
Figure 13. Scan Volume and Scan Depth
a. Rear Scan Window c. Scan Volume
b. Front Scan Window d. Scan Depth
The optimal scanning distance is at the center of the scan volume, or
approximately 4.5 inches (11 cm) from the window.