User`s guide
Table Of Contents
- Table of Contents
- Introduction
- Product Overview
- Manual Overview
- Operational Overview
- Duet Scanner Controls
- Connectors
- Sleep Mode
- Unpacking
- Verifying Scanner Operation
- Countertop Installation
- Connecting the Scanner
- Troubleshooting
- How To Scan
- Customizing Your Scanner's Operation
- Routine Maintenance
- Appendix A - Specifications
- Appendix B - Regulatory Agency Information
- Stand Installation Template
User's Guide 21
AC/DC power supply (if required)
1. Connect the interface cable to the scanner.
2. Connect the DC barrel plug into the side of the
connector, or into the DC power connector.
3. Connect the interface cable to the host terminal.
4. Plug the AC/DC power supply into a functional AC
outlet.
Power up the system and scan a few items to verify that data is
properly communicated between the scanner and your POS termi-
nal.
Figure 11. Connecting the Scanner to the Host Terminal
a. Interface Connector d. To Host Terminal
b. DC Power Connector e. Interface Cable
c. Host Terminal Connector* f. AC/DC Power Supply
*Your Host Terminal Connector may vary from illustration