User`s guide
Table Of Contents
- Table of Contents
- Introduction
- Product Overview
- Manual Overview
- Operational Overview
- Duet Scanner Controls
- Connectors
- Sleep Mode
- Unpacking
- Verifying Scanner Operation
- Countertop Installation
- Connecting the Scanner
- Troubleshooting
- How To Scan
- Customizing Your Scanner's Operation
- Routine Maintenance
- Appendix A - Specifications
- Appendix B - Regulatory Agency Information
- Stand Installation Template
User's Guide 15
Countertop Installation
The scanner stand has non-skid rubber feet on the bottom, and is
weighted to keep the stand stable. It may be placed on the
countertop with no additional installation. The stand may also be
permanently mounted to the countertop.
Scanner Stand Installation
Free Standing – NO additional installation is required when the
scanner stand is not attached to the countertop.
Fixed Installation – The Duet scanner may be secured to the
countertop in two ways:
• Install the scanner using double sided tape affixed to the
baseplate.
• Mount the stand to the countertop using the screw slots
in the baseplate.
Tape Installation
To install the scanner using the two sided tape:
1. Remove the four rubber feet from the bottom of the
stand.
2. Remove the backing from the one side of the tape
and attach the tape to the baseplate on the bottom of
the stand as shown in Figure 8.
3. Remove the backing for the outer side of the tape.