Specifications

Product Reference Guide 1-1
Chapter 1
Introduction
This Product Reference Guide contains comprehensive instructions on
how to install the scanner, how to program it using special programming
feature bar code labels, and advanced user information as described in the
following overview.
Manual Overview
Chapter 1, Introduction, presents the manual’s contents, describes features
and specifications, provides regulatory and safety information, and lists
the bar code symbologies the scanner will read.
Chapter 2, Site Preparation and Installation, supplies physical dimen-
sions for the scanner and its most common accessories, and details counter
preparation and installation. Cable routing, connection and testing are
also explained in this section.
Chapter 3, Operation and Maintenance, describes use and maintenance;
providing details about operator controls, programming and diagnostic
modes. Scanner routine maintenance is outlined in this section as well.
Chapter 4, Problem Isolation, provides an outline of three scanner test
modes: Selftest, Operational Tests and Diagnostic Tests. Descriptions of
the error indications if the scanner detects a system problem and trouble-
shooting flowcharts to aid in problem resolution are also presented.
Chapter 5, Programming, details procedures and provides custom bar-
codes for setting programmable scanner features. This section is organized
by the categories: General Features, Interface Related Features and Sym-
bology Related Features.
Appendix A, LED/Beeper Indications & Controls, lists the various func-
tions and indications of the scanner control panel features.