Owner's Manual

SPEAKERS
Imagine W3 Wall Bracket
1. Using the template, locate the desired speaker location noting the required clearances.
2. Using a sharp object, mark points
H1 through H8 for horizontal mounting on the wall.
H2
+
H4
~ ~
3. Drill and install the required anchors for the correspondi ng screw size being used. At least 5mm ( or #8 ) flathead steel screws are recommended.
Note: It is ideal to have anchors fastened into studs where possible.
It is your responsibility to ensure that the surfaces selected f or attaching the
speakers are structurally sound and strong enough to bear the weight of the speakers.
4. Feed the speaker wires though the wall bracket Opening.
Speaker Clearance for installation
4.._ ___ Top of Speaker __ __.+
OPENING )
5. Mount t
he bracket to the wal l. Note: F or speaker wi re s sec ur ed on the wa ll surface, use the 8 spacers provided to allow for the spacing
necessary behind the b
ra cket.
6. Carefully mount the speaker to the bracket.
7. Carefully load test the insta ll ed speaker to ens ur e that it is securely attached and saf e.
NOTE: THE INSTALLER IS RESPONSIBLE FOR A SAFE AND SECURE INSTALLA TI ON.