COLOUR VIDEO DOORPHONE KIT instruction manual Choose for intercoms PAN780SK PAN780FK Version 2.0 fire • security • intercoms psaproducts.com.
1
CONTENTS PAGE 1. Features 3 2. Kit Components 3 3. Outdoor Camera Specifications 3 4. Indoor Monitor Specifications 4 5. Indoor Monitor Installation 5 6. Outdoor Camera Installation 6 7. Wiring & Maintenance Instructions 7 8. Operating Instruction 11 9.
1. FEATURES 1. 21mm slim indoor monitor with touch buttons 2. Weather and vandal resistant outdoor camera 3. 7” LED screen, no radiation, low power consumption and high definition. 4. Hands free communication to door. 5. Hands free internal paging communication to monitors 6. Surface touch function. 7. Unlock two doors respectively. 8. Monitoring the outside of house. 9. Fourteen polyphonic melodies. . 10. Ring volume, talking volume, chroma and brightness adjustable. 2.
High Intensity Lights Microphone 123456 Name Plate Connection Terminals Speaker Call 4. INDOOR MONITOR SPECIFICATIONS Microphone Power Indicator Light Chroma Adjuster Brightness Adjuster Talking Volume Adjuster Volume Adjuster Selection Adjuster Power Socket Talk/Intercom Door Release Monitor Gate Release speaker 1. Adapter input voltage: AC110-240V/ 60Hz-50Hz 2. Adapter output voltage, output current: DC15V 1200mA 3. Talking last time: 120S±10% 4. Monitoring last time: 40S±10% 5.
5. INDOOR MONITOR INSTALLATION Bracket Picture 1. 1. Picture 2. Fix the bracket of the video indoor monitor on the wall with screws (Picture 1). 2. Hang the monitor on the bracket after finishing the wire connection. Plug the enclosed adapter into the sockets of AC power and the monitor (Picture 2).
6. OUTDOOR CAMERA INSTALLATION SURFACE CAMERA WITHOUT RAINHOOD SURFACE CAMERA WITH RAINHOOD Rainhood Door Camera Door Camera Front Cover Front Cover call within 30cm 150~160CM FLUSH CAMERA 30.0CM Wall Box Flush Camera N.
7. WIRING & MAINTENANCE INSTRUCTIONS Cable Specifications: • 0 to 30m: minimum CAT 5 or 4 Core Stranded 0.50mm2 • 30 to 80m: minimum 4 core Stranded 0.75mm2 1. To avoid any interference, all intercom cables should maintain 50mm separation from 240VAC wires 2. Never install door camera directly facing sunlight. This will create a white image on indoor monitor and may damage the camera lens over time. 3. Do not install the monitor or power supply in areas of high temperature or high humidity. 4.
Lock 12vdc 500mA 1 2 3 4 5 6 MONITOR OUT 1 2 3 4 5 DOOR 1 2 3 4 5 6 7 MONITOR IN POWER 1 2 3 4 5 6 MONITOR OUT Indoor Monitor A DC 15V 1 2 3 4 5 DOOR 1 2 3 4 5 6 7 MONITOR IN POWER Lock B + - Power supply 1 2 3 4 5 6 MONITOR OUT DC 15V PAN780SK/FK: One Door to Three Monitors Wiring Diagram Outdoor Camera 1 2 3 4 5 6 7 MONITOR IN POWER LOCK Indoor Monitor C LOCK 1 2 3 4 5 DOOR Indoor Monitor B DC 15V 1. Audio wire 2. Ground wire 3. Video wire 4.
2 Door Controller 1 2 3 4 5 DOOR 1 2 3 4 5 6 7 B MONITOR IN 1 2 3 4 5 6 MONITOR OUT DC 15V IN 1 2 3 4 5 1 2 3 4 5 6 5 43 2 1+ - DOOR Indoor Monitor C Indoor Monitor A POWER LOCK A 1 2 3 4 5 6 MONITOR OUT 1 2 3 4 5 POWER MONITOR IN 1 2 3 4 5 6 7 1 2 3 4 5 6 MONITOR OUT Lock B + - Power supply PAN780SK/FK: Two Doors to Three Monitors Diagram Lock 12vdc 500mA 1 2 3 4 5 6 7 MONITOR IN POWER DC 15V LOCK Outdoor Camera A 1. Audio wire 2. Ground wire 3. Video wire 4.
8. OPERATING INSTRUCTION 1. Rings/chimes will be heard & images of visitors will be seen on the monitor once the CALL button of door camera is pressed. 2. To talk to the visitor, touch TALK . 3. If the system is connected to an electric strike, touch DOOR UNLOCK 4. If the system is connected to a motorised gate, touch GATE UNLOCK 5. To end the conversation, touch TALK again. Talk mode will automatically shut down after approximately 120 seconds if not ended. 6.
9. WARRANTY & LIABILITY 1 PSA Products Pty Ltd (ABN: 99 076 468 703) of 17 Millicent Street, Burwood 3125 Victoria, Australia warrants this product for a period of two years from the date of purchase, as reflected on the Authorised Reseller’s or Distributor’s invoice / receipt provided to you.
12
psaproducts.com.au 1300 772 776 enquiry@psaproducts.com.
