Installation Instructions

SLIDINGDOORS
INSTALLATION INSTRUCTIONS
1 2 3 4 5 6
PROGRAMMING
INSTALLATION INSTRUCTIONS
1 2 3 4 5 6
TROUBLESHOOTING
Lock is open and the keys are not working:
• The battery low alarm was activated.
• Please insert a new battery.
Key is not working:
• Is there any sound? If so, please try to activate the
key with the programming card.
• No sound: Try to find the right position at the
furniture. The keys have a higher range if you place
them fast at the right point than moving slowly.
The programming card does not work:
• Do you have a second card?
• If not, please unscrew the locks, press the button
on the backside and teach the lock the program-
ming card again.
No sound with any card:
• Use a flat iron part (not a screwdriver) and break up
the furniture. The rated breaking point at the latch
will save the furniture.
Motor runs, lock stays locked:
• Maybe there is some pressure on the bolt in the
lock.
• Move the door in all possible directions and try it
again.
• Press the door in and use your key again.
• Adjust the locking devices after such a problem.
I lost my key:
• Delete all keys with the programming card.
• Activate all keys again.
SECURITY ADVICE
MANUAL
>10cm
>0,4
Made in AUSTRIAElectronic locks
5
16
H
Instalation Video
5 YEARS REPLACE WARRANTY
Technical support: [phone]
14
H