Installation Manual Manual

PS Engineering
PMA7000CD- Series Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-790-0010 Page 1-4 Revision 10, September 2005
Compact Disc Player PCD7100-R, P/N 11959
TSO Compliance
C50c, Class A
Environmental Compliance
B1CABSRXXXXXXABBBBTMXXE2
Operating Temperature Range:: -15º C to 55ºC
Altitude: Up to 25,000 feet in a non-pressurized area
DIMENSIONS: Height: 1.5 in. (3.8 cm) Width: 6.25 in. (15.9 cm)
Depth: 7.8 in. (19.8 cm)
WEIGHT (With Rack & Connectors): 1.9 lb. (.54 kg)
1.6 EQUIPMENT SUPPLIED
1 ea. of the following units:
Model Description Part Number
PMA7000S-CD MP3 PMA7000S Audio Panel with Stereo Intercom for use with
PCD7100-R, Silver trim. NO MARKER beacon receiver.
7000S - Opt CD
PMA7000CD MP3 PMA7000CD Audio Panel with Marker Beacon and Stereo inter-
com for use with PCD7100-R. Silver trim ring.
7000MS – Opt CD
Option 1 Adds 1-minute continuous-loop digital recorder
PCD7100-R Same as above, but with MP3 capability 11959
Option 3 Black bezel units (No silver trim)
PMA7000CD Installation Kit: 250-007-3613
Description Quantity Part
Number
PMA7000CD installation rack assembly 1 120-430-0420
Top Molex Connector Shell w/key, 44 pin, key 4/5 1 120-425-4402
Bottom Molex Connector Shell w/key, 44 pin, key 7/8 1 120-425-4400
Gold Plated Crimp Pins 88 425-001-0002
4 40 X 7/16 screw w/nylon patch 4 475-440-0007
Grounding bar 1 430-007-0001
6-32 X 3/4 pan head Phillips screw 2 475-632-0038
6-32 Nut Flat 2 475-632-0003
6-32 Lock Nut 2 475-632-0004
Cable Clamp 1 625-001-0002
#6-32 x ½” Flat head Phillips screw 6 475-632-0012
#6-32 Clip Nut 6 475-630-0002
Parts identification sheet 1 002-250-7028
PCD7100-R Remote Player (11959) Installation Kit
Part Number Description 250-795-0005
430-795-0020 Tray 1
425-015-2052 DB 15 Pin Connector Shell 1
425-020-5090 Crimp Sockets 15
425-015-0003 Connector Hood 1
475-632-0012 #6-32 x ½” Phil screw. 4
475-630-0002 6-32 Clip Nut 4
475-013-0001 #4-40 Kep-Nut 2
470-440-0018 #4-40 Screw 2
1.7 EQUIPMENT REQUIRED BUT NOT SUPPLIED
a) Circuit Breaker: 1 ea; 3 amp PULL TYPE REQUIRED for PMA7000CD