Installation Manual

PS Engineering Inc. ®
PAR100EX Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-760-0000 Page 2-15 Rev. 12, Jan. 2014
Carefully reassemble the unit.
2.12 Reassembly
3. Using the nylon spacer removed in step 2, compress the spacer so it becomes ob-
long.
Figure #3
a. Install one long screw through the top lid, near the front edge on the power
supply board side, and add then add the nylon spacer from § 2.8.
Figure #4
4. Place the lid back on the unit aligning holes.
5. Install qty. 3 more long thread screws into the lid.