User Manual

PS Engineering Inc. ®
PAC15EX Audio Selector Panel and Intercom System
Installation and Operator’s Manual
200-015-0000 Page 1-2 Rev. 1, Jan. 2014
1.5 SPECIFICATIONS
DIMENSIONS: Height: 1.3 in. (3.3 cm) Width: 6.25 in. (16.9 cm)
Depth behind panel 7.15 in. (18.16 cm)
WEIGHT
PAC15EX Unit
Rack with connectors
1.34 lb. (0.61 kg)
0.51 lb. (0.24 kg)
AUDIO CONTROLLER POWER REQUIREMENTS (Including Internal Lighting):
Voltage: 11-33 VDC
Maximum Current: 2.5 Amp (Externally protected by a 3A pull-type
breaker)
Audio Controller Specifications
Audio selector panel input impedance:
510 
Input Isolation: -60 dB (min.)
Receiver Inputs: 4 (Com 1, Com 2, Aux 1, Aux 2)
Unswitched Inputs: 4
Transmitter Selections: 3 (Com 1, Com 2,
Com1/2)
Headphone Impedance:
150 – 1000 
Headphone Output: 38 mW each headset, no clipping <1% THD typi-
cal into 150
Microphone Impedance:
150 - 600 
Intercom Specifications
Intercom Positions: 4 places (with individual IntelliVox® circuits)
Music Inputs:
2, (Independent, Stereo)
Music Muting:
>-30 dB "Soft Mute" when Com or intercom active.
Distortion:
<1% THD @ 38 mW into 150
Mic Freq. Response, 3 dB:
300 Hz - 6000 Hz
Music Freq. Response, 3 dB:
10 Hz – 26 kHz
1.6 EQUIPMENT SUPPLIED
1 ea. of the following items:
Model Description Part Number
PAC15EX PAC15EX Remote-mounted Audio Controller with intercom 050-015-0100
Installation Kit: 250-015-0000, containing:
Description Quantity Part Number
PAC15EX installation rack assembly 1 430-890-0040
PAC15EX Rack back plate 1 430-890-0050
44-pin connector kit 2 120-891-2045
Backshell, connector 2 625-025-2465
Backshell Retainer 2 431-891-0100
4 40 X 7/16 screw w/nylon patch 4 475-440-0007
4 40 X 3/8 screw w/lock washer 4 475-440-1038
4 40 X 1/8 screw w/lock washer 2 475-440-0001
Solder Lug 2 475-009-0001
Cable Clamp 1 625-001-0002
#6-32 x ½” Flat head Philips screw 6 475-632-0012
#6-32 Clip Nut 6 475-630-0002
PAC15EX Horizontal Mounting Flange 2 430-200-0042
PAC15EX Vertical Mounting Bracket 1 430-200-0070