Specifications
PS Engineering 
PMA8000B Audio Selector Panel and Intercom System 
Installation and Operator’s Manual 
200-890-0100  Page 4-1  Rev. 13, Dec. 2009 
  Section IV – Warranty and Service 
4.1  Warranty 
In order for the factory warranty to be valid, the installations in a certified aircraft must be accomplished 
by an FAA-(or other ICAO agency) certified avionics shop and authorized PS Engineering dealer.  If the 
unit  is being installed by a non-certified individual in an experimental aircraft, a factory -made intercom 
harness must be used for the warranty to be valid. 
PS Engineering, Inc. warrants this product to be free from defect in material and workmanship for a p e-
riod of three (3) years  from the  date of sale. During the first  twelve (12) months of the three-year war-
ranty period, PS  Engineering,  Inc.,  at its  option,  will  send a replacement unit at our expense if the unit 
should be  determined  to  be  defective  after consultation with a  factory  technician.  For  the  remaining 
twenty-four (24) months of the three-year warranty period, PS Engineering, Inc., at its option,  will send 
a similar replacement unit at the customers expense if the unit should be determined to be defective after 
consultation with an authorized PS Engineering dealer. 
All transportation charges for returning the defective units are the responsibility of the  purchaser. All do-
mestic transportation charges for returning the exchange or repaired unit to the purchaser will be borne by 
PS Engineering, Inc. The risk of loss or damage to the product is borne by the party making the shipment, 
unless the purchaser requests a specific method of shipment. In this case, the purchaser assumes the risk 
of loss. 
This  warranty is not transferable. Any  implied warranties expire at the expiration date of this warranty. 
PS  Engineering  SHALL  NOT  BE  LIABLE  FOR  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES. 
This warranty does not cover a defect that has resulted from improper handling, storage or preservation, 
or unreasonable use or maintenance as determined by us. This warranty is void if there is any attempt to 
dissemble  this  product without  factory authorization.  This  warranty  gives  you specific  legal  rights,  and 
you may also have other rights, which may vary from state to state. Some states do not allow the exclusion 
of limitation of incidental or consequential damages, so the above limitation or exclusions may not apply 
to you.  
All items repaired or replaced under this warranty are warranted for  the remainder of the original wa r-
ranty period. PS Engineering, Inc. reserves the rights to make modifications or improvements to the prod-
uct without obligation  to  perform  like  modifications  or improvements to previously manufactured pro d-
ucts. 
4.2  Factory Service 
The units are covered by a three-year  limited warranty. See warranty information. Call PS Engineering, 
Inc.  at (865)  988-9800  before you return any  unit. This will allow the service technician to provide any 
other suggestions for identifying the problem and recommend possible solutions.  
After  discussing  the  problem  with  the technician  and  you  obtain  a  Return  Authorization  Number,  ship 
product to: 
PS Engineering, Inc. 
Attn: Service Department 
9800 Martel Rd 
Lenoir City, TN 37772 
(865) 988-9800    FAX (865) 988-6619 
Email: support@ps-engineering.com 
Units that arrive without an RMA number, or telephone number for a responsible contact, will be 
returned un-repaired. PS Engineering is not responsible for items sent via US Mail. 










