User Manual

PS Engineering, Inc.
IntelliPAX Expansion Unit
200-250-0005 Page ii Rev. 14, Jan. 2012
the Publications Manager at PS Engineering, Inc., 9800 Martel Road, Lenoir City, TN 37772.
Phone [phone] www.ps-engineering.com
Table of Contents
SECTION I – GENERAL INFORMATION 1-1
1.1 INTRODUCTION 1-1
1.2 SCOPE 1-1
1.3 DESCRIPTION 1-1
1.4 APPROVAL BASIS 1-1
1.5 SPECIFICATIONS 1-2
1.6 EQUIPMENT REQUIRED BUT NOT SUPPLIED 1-2
SECTION II – INSTALLATION 2-1
2.1 GENERAL INFORMATION 2-1
2.2 UNPACKING AND PRELIMINARY INSPECTION 2-1
2.3 EQUIPMENT INSTALLATION PROCEDURES 2-2
2.4 CABLE HARNESS WIRING 2-2
2.4.1 ELECTRICAL NOISE ISSUES 2-2
2.4.2 POWER REQUIREMENTS 2-3
2.4.3 INTERCONNECTION WITH MAIN UNIT 2-3
2.4.4 AUXILIARY INPUTS 2-3
2.5 POST INSTALLATION CHECKOUT 2-3
SECTION III – OPERATION 3-1
3.1 POWER 3-1
3.2 ADJUSTING THE VOLUME 3-1
3.3 INTELLIVOX® SQUELCH 3-1
3.4 MUSIC MUTE 3-1
SECTION IV WARRANTY AND SERVICE 4-1
4.1 WARRANTY 4-1
4.2 FACTORY SERVICE 4-1
APPENDIX A INSTRUCTIONS FOR FAA FORM 337 AND AIRWORTHINESS A
5.1 SAMPLE TEXT FOR FAA FORM 337 A
5.2 INSTRUCTIONS FOR CONTINUED AIRWORTHINESS: A
APPENDIX B WIRING INFORMATION B
Rev Date Change
5 11/2005 Corrected Karaoke description in section 3.4
6 10/2006 Corrected PMA4000 interconnect
7 12/2006 Added 11626 for use with PM1000DAP
8 8/2007 Added PM1200 remote installation drawing and picture
9 4/15/08 Added installation kit part numbers
10 5/27/08 Added Stand Alone information
11 11/19/08 Changed PAC24 applicability from 11606 to 11616
12 2/26/09 Change PAC 24 BACK to 11606
13 7/13/09 Refer PAC24 wiring to PAC24 IM for details
14 1/23/12 Added 11636 for PMA8000D