Owners Manual
4865 Sterling Drive, Boulder, CO 80301 Troubleshooting
PH: 1 (800) PSAUDIO service@psaudio.com www.psaudio.com 15-061-01-1
Rev D
Troubleshooting
©2018 PS Audio Inc. All rights reserved.
Owner’s Reference DirectStream DAC
®
In any of these cases the remedy is quite simple. Remove the device and force Windows to
reinstall the driver and the device.
DirectStream will show up under device manager as “PS Audio PerfectWave DSD” It should
show up under a heading “PS Audio USB 2.0 Audio Devices”, this is the USB2.0 driver.
The entry under “Sound video and game controllers” is the USB1.0 fallback driver.
DirectStream has enough output gain to directly drive most power ampliers without a
preamplier. DirectStream's volume control is a no-loss design and may be used at any
setting from 1 to 100 without fear of resolution loss.
However, if there is too much gain when you connect directly to a preamplier or power
amplier, it is possible to select a lower output gain setting. To do so, go to the setup
touch screen on DirectStream and choose the lower output option (see the Quick Start
guide). You can also turn the output attenuator on or o by pressing the Filter button on
DirectStream's remote control.
Too much gain
10