Owners Manual

4865 Sterling Drive, Boulder, CO 80301 Quick Start Guide
PH: 1 (800) PSAUDIO [e-mail] www.psaudio.com 15-061-01-1
Rev D
Quick Start Guide
©2018 PS Audio Inc. All rights reserved.
Owner’s Reference DirectStream DAC
®
least 3 hours before use.
Should DirectStream need to be rebooted, use the rear panel power switch to power cycle the
instrument. It's best to wait 30 seconds before powering back on.
SELECT THE INPUT
The rst step is to select the input
you wish to play. The input select is
on the touch screen. Touch the input
selected which is the visible input icon
already displayed. The input selection
list appears. Scroll through the list and
touch the input you wish to play. The
screen reverts back to the main screen
and the selected input is displayed.
Each input has a lock light associated
with it. The lock light has two states:
connected (green) and not connected (red). This lock light indicator is located in the upper
right hand corner of the input icon. Some transports will not appear connected until you start
to play the transport.
INPUT NAMING
For greater convenience it is
possible to assign a custom name
to each input such as PerfectWave
Memory Player, Apple TV, etc. To
name each input, touch the input
icon from the main screen. The
input list appears. Touch the small
edit icon of the input you wish to
name and the edit screen appears.
Type in the name of the product
and touch “SUBMIT”. If you wish to
return to the default input name,
go to the second keyboard screen (accessed by pressing the numeric key labeled 123/.!) and
touch “Restore Default”.
Input Selection
Input Naming
5