Owner's Manual

Conguring

Speaker Feet

aspen FR30

For hard oors – twist to remove bottom 0.375” spiked tip from feet to expose the black

plastic disc underneath.

Note: For carpeted oors – spiked tips should be removed only after standing

bottom speaker cabinet up.

The foam covering the metal base of the bottom speaker enclosure can be placed

immediately to the side and used as a fulcrum to tilt and rotate the speaker onto its

spiked feet.

The bottom .375” spiked tips can then be removed and the included black carpet sliders

(located in the foam packaging covering the metal base of the speaker) can be screwed

into place.

This way, the speaker can be easily slid around during initial listening and setup. When

the nal speaker location is determined, replace carpet sliders with the spiked tips for

best performance.

Getting Started