Owner's Manual

Getting Started

4865 Sterling Drive, Boulder, CO 80301 Getting Started

PH: 1 (800) PSAUDIO service@psaudio.com www.psaudio.com 15-056-11-1

DirectStream Power Plant 15

Location

Once your new Power Plant 15 is unpacked, you’ll need to nd a convenient place to set it.

Mounting

The Power Plant 15 should be placed with consideration of providing air circulation to the unit. If you

wish to install the P15 into your component rack, the purchase of an aftermarket, custom-designed

shelf may be necessary.

If your equipment is located a long distance from the Power Plant 15, it is preferable to use a long,

heavy gauge shielded power cable between the AC receptacle in the wall and the Power Plant. This

is better than long individual power cables between the connected components and the Power Plant

15.

Conditioners

We discourage the use of any other power conditioning equipment before or after the P15 without

considerable evaluation. A critical determination will have to be made as to whether there are

any sonic or visual shortcomings. The P15 has a signicant input and output passive lter design,

and adding extra power conditioners to its input or additional ltering to its output may, in fact, be

undesirable.

Installation

Considerations