Owner's Manual
Operation Guide
4865 Sterling Drive, Boulder, CO 80301 Operation Guide
PH: 1 (800) PSAUDIO service@psaudio.com www.psaudio.com 15-056-11-1
Rev B©2021 PS Audio Inc. All rights reserved.
DirectStream Power Plant 15
®
13
CleanWave
By selecting the icon labeled CLEAN the Power Plant 15 will activate the CleanWave function and
the display of the P15 will begin to countdown the time left as the P15 is applying the CleanWave
signal. CleanWave injects a series of higher frequencies that ride on the main sine wave to help
“degauss” connected magnetics.
To ensure that CleanWave is eective, make sure all connected equipment is on and functioning.
CleanWave can be used between CD’s, movies and vinyl. It is not recommended to activate
CleanWave while you are listening as it may not sound correct until the CleanWave cycle has
nished. The option exists for a 5 second or a 60 CleanWave cycle by touching the Add Time
button.
Firmware Screen
Restore Defaults
The restore defaults button resets the user dened settings back to the factory settings.
The Bootloader / Firmware / Power Meter / Oscillator / Web versions are listed next. On occasion PS
Audio will release rmware updates for the P15. It is important that you keep your P15 fully up-to-
date. Look for rmware releases in our Newsletter or at:
http://www.psaudio.com/support/downloads/