Instruction Manual

7
Assembly- Fire Conversion Kit Installation
200799_1
Remove the existing fire side panels from either side of the fire, as shown in Diagram 6.
Retain the 10 x No.8 x12mm Domed-Head Screws. 5 x per side. The side panels are no longer required and can be
discarded.
If applicable remove the transit brackets from the bottom of the fire, as shown in Diagram 7. Remove the 4 x No.8 x12mm
Domed-Head Screws.
The transit brackets and screws are no longer required and can be discarded.
Diagram 6
Diagram 7