Instruction Manual

Magnet
12
Installation- Fixing the Fire continued…..
200799_1
Remove the protective film.
Position the side panels down the sides of the opening between the fire body and the brackets, as shown in Diagram 17.
Secure in position using the 4x No.8 x13mm Pan-Head Washer Screws, as shown in Diagram 18.
Diagram 18
Diagram 17
Attach the 4 x Ø 10 x 4mm Magnets in postion.
1 x in each bottom corner of the opening, onto the metal side panels, as shown in Diagram 19.
1 x at each end of the magent bracket, as shown in Diagram 20.
Diagram 19
Diagram 20
Magnet