Installation and Operation Guide
Table Of Contents
- Chapter 1: Introduction
- 1.1 First steps
- 1.2 Service addresses
- 1.3 About this manual
- Chapter 2: Safety
- 2.1 Safety symbols
- 2.2 Information for the system operator
- 2.3 Information for operating personnel
- 2.4 Intended use
- 2.5 Residual risks and safety measures
- Declaration of conformity
- Certifications
- Chapter 3: Technical data
- Chapter 4: System description
- 4.1 VIBCONNECT RF bridge
- 4.2 VIBCONNECT RF sensor unit
- 4.3 VIBCONNECT RF sensor
- Chapter 5: Installation & commissioning
- 5.1 Quick guide
- 5.2 Configuration in OMNITREND
- 5.3 Installation & commissioning of bridge
- 5.4 Installation & commissioning of sensor unit
- 5.5 Installation of sensors
- 5.6 Configuration in OMNITREND (continued)
- 5.7 Installing additional sensor unit
- Chapter 6: Maintenance
- 6.1 Cleaning
- 6.2 System time correction
- 6.3 Installation report
- 6.4 Battery-powered sensor unit
- 6.5 Update
- 6.6 Warranty
- 6.7 Spare parts and accessories
- Chapter 7: Troubleshooting
- Chapter 8: After use
67
VIBCONNECT RF 05.2012
Maintenance
6.5 Update
To update the firmware for the system components, download
the update file on the bridge. The sensor units are automatically
updated during the subsequent data transmission.
• Contact the bridge through a browser (see also '5.3.1 Changing
IP address of bridge', page 32).
• On the main menu, click 'Upload Configuration'.
• Click <Browse>, and select the update file (eg 'VIBCONNECT-
RF_FW_1.00-301.ptz').
• Click <Upload File> to transfer the file. This process takes about
a minute.
• Then scroll back to the main menu, and click 'Reboot device' to
reboot the bridge. This process takes about three minutes.
• Click "System Information" to check the new firmware version.
6.6 Warranty
The warranty period for the VIBCONNECT RF is 1 year. Unauthorized
service work on the system shall automatically void all warranty.
6.7 Spare parts and accessories
Use only original spare parts and accessories. For details, refer to
the VIBCONNECT product catalog (LIT 72.700). The latest cata-
log edition can be downloaded from the PRÜFTECHNIK website
(www.pruftechnik.com).