Installation and Operation Guide
Table Of Contents
- Chapter 1: Introduction
- 1.1 First steps
- 1.2 Service addresses
- 1.3 About this manual
- Chapter 2: Safety
- 2.1 Safety symbols
- 2.2 Information for the system operator
- 2.3 Information for operating personnel
- 2.4 Intended use
- 2.5 Residual risks and safety measures
- Declaration of conformity
- Certifications
- Chapter 3: Technical data
- Chapter 4: System description
- 4.1 VIBCONNECT RF bridge
- 4.2 VIBCONNECT RF sensor unit
- 4.3 VIBCONNECT RF sensor
- Chapter 5: Installation & commissioning
- 5.1 Quick guide
- 5.2 Configuration in OMNITREND
- 5.3 Installation & commissioning of bridge
- 5.4 Installation & commissioning of sensor unit
- 5.5 Installation of sensors
- 5.6 Configuration in OMNITREND (continued)
- 5.7 Installing additional sensor unit
- Chapter 6: Maintenance
- 6.1 Cleaning
- 6.2 System time correction
- 6.3 Installation report
- 6.4 Battery-powered sensor unit
- 6.5 Update
- 6.6 Warranty
- 6.7 Spare parts and accessories
- Chapter 7: Troubleshooting
- Chapter 8: After use
4
VIBCONNECT RF 05.2012
5.4 Installation & commissioning of sensor unit ................... 39
5.4.1 Overview of connections and interfaces ............................... 40
5.4.2 Measuring reception field strength at location of installation 42
5.4.3 Mounting sensor unit .......................................................... 44
5.4.4 Connecting sensor unit ........................................................ 45
5.4.5 Commissioning sensor unit .................................................. 46
5.5 Installation of sensors .................................................... 47
5.5.1 Choosing the measurement locations .................................. 47
5.5.2 Mounting sensor ................................................................. 48
5.5.3 Installing and connecting sensor line to sensor unit .............. 53
5.6 Configuration in OMNITREND (continued) ..................... 54
5.6.1 Registering bridge in OMNITREND ....................................... 54
5.6.2 Registering sensor units in OMNITREND ............................... 56
5.6.3 Assigning measurement locations in the database to a sensor
unit and bridge ............................................................................. 58
5.6.4 Creating measuring configuration ....................................... 60
5.6.5 Loading measuring configurations to the bridge .................. 62
5.6.6 Importing measurement data in OMNITREND ...................... 62
5.7 Installing additional sensor unit .................................... 63
Chapter 6: Maintenance .................................................. 64
6.1 Cleaning ....................................................................... 64
6.2 System time correction .................................................. 64
6.3 Installation report .......................................................... 64
6.4 Battery-powered sensor unit ......................................... 65
6.4.1 Battery status ....................................................................... 65
6.4.2 Changing battery ................................................................. 66
6.5 Update ......................................................................... 67
6.6 Warranty ...................................................................... 67
6.7 Spare parts and accessories ........................................... 67
Chapter 7: Troubleshooting ............................................. 68
Chapter 8: After use ......................................................... 70
Decommissioning ......................................................................... 70
Disposal ........................................................................................ 70
Contents