User's Manual

VIBCONNECT RF 11.2011

Installation and commissioning

• Click the <Register Device> button. The bridge is now registered

in OMNITREND and logged on (no need for password).

5.6.2 Registering sensor units in OMNITREND

• In the main menu, click <Options> / <Registration / Conﬁgu-

ration>.

• In the ‘Registration’ window (‘OMNITREND’ tab), check whether

‘VIBCONNECT RF’ is the current OMNITREND version. If this is

not the case, change the settings.

• Call up the ‘Measurement Device’ tab.

• In the device list, select the bridge that is within the transmission

range of the sensor unit(s).

Note

If there is more than one bridge in the system, you might need to

check for every bridge whether the sensor unit is in its radio range

and whether it has already established contact.

» To do this, select “RF Sensor Units” in the main menu of the

bridge (see also ‘Main menu of bridge’, page 30).

• Click the <Edit> button.

You do not need

a password to