User's Manual

VIBCONNECT RF 11.2011

> 15

Ø 27

0.5±2

> 12

90°

Mounting sensor with screw adapter

tools and auxiliary equiPment

• Power drill with two drill bits (3.5 / 6.8 mm) and depth gauge

• Spot facer

• M8 bottoming tap

• Size 19 torque spanner

• Compressed air to clean mounting point

installation

Select drilling point:

• The minimum distance between the drill hole and the protruding

edges of the sensor housing is 35 mm. Ensure that there is suf-

ﬁcient space for the socket wrench used to tighten the adapter.

Drill hole:

• Using the 3.5 mm drill bit with depth gauge, pre-drill a hole of

> 15 mm.

• Drill out hole with 6.8 mm drill bit.

• Face the drill hole with the spot facer (depth: approx. 1 mm).

• Cut the thread (M8), thread length: > 12 mm.

Note

Ensure that it is permissible to

drill a hole at the selected loca-

tion. For instructions, contact the

machine manufacturer or refer

to the machine documentation.

Installation and commissioning

adhesive

VIB 3.418

magnetic

VIB 3.423

screwed (M8)

VIB 3.480

Drilling and facing hole,

cutting thread