User's Manual

1) Rotational arc showing points taken and rotational angle covered by the shafts. The arc changes
colour from red [<60°] -> yellow -> green [>70°]
2) Rotational angle completed by the shafts for current measurement
3) Number of measurement points taken for current measurement
4) Standard deviation attained in current measurement
5) 'Proceed' icon – tap to continue to view measurement results
The ‘Proceed’ icon
(whose colour changes with the rotational arc) becomes active after three
measurement points have been taken.
The horizontal and vertical coupling results are displayed when the shafts are rotated at least over 60°
and a minimum of three measurement positions are recorded.
Tap
the ‘Proceed’ icon to continue to view results or to re-measure.
If required, Live
Move may be accessed via the 'Results' screen.
22 Edition: (Undefined variable: General.Edition)
(Undefined variable: General.UserGuideTitle)