User's Manual

If the laser beam status is "OK" or "Centered" [1] tap "Set to zero" [2] to set the XY values of the two
detector planes to 0,0. These values are then monitored to check the stability of the values. Tap "Abso-
lute" to return to the absolute values.
Note that the menu items on the screen may be used to display following items:
Sensor
list – displays serial number of sensors detected or previously used, as well the interface used
for connection
Laser properties – displays detailed information of sensALIGN laser in use
Sensor properties – displays detailed information of sensALIGN sensor in use
FictionSoft 17
(Undefined variable: General.UserGuideTitle)