Users Manual

Install & Service Manual AT-SM-04
Prudent │ Flat-panel Digital X-ray Detector Rev.1.0.8
ⓒ 2020. PIXXGEN Corporation. All rights reserved. -37-
7.2. Wireless Detector
7.2.1. The settings between Bridge (Repeater) and PC
(1) Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and
enter http://tplinklogin.net/ and then login to the system as an administrator (ID:
admin / PW: admin).
CAUTION!
The recommended product for Bridge of Wi-Fi Router is TP Link Archer C7. In
this instruction, it has been instructed based on Archer C7 product. The rest of
Wi-Fi Router are able to be used. However, if you like to use it, additional test
is required.
Tip!
When you set up Bridge at http://tplinklogin.net/ and if it is not able to enter
to set up page, disable all Network Adopter at Network Adopter Setting except
the Network Adopter that is connected Bridge.
After completed the setting for Bridge, enable all the Network Adopter at
Network Adopter Setting that you have disabled previously.
Tip!
When setting the Bridge (Repeater), set IP address as automatically in the
TCP/IPv4