Users Manual

Install & Service Manual AT-SM-04

Prudent │ Flat-panel Digital X-ray Detector Rev.1.0.8

(3)

Open TCP/IPv4 and set the static IP as

192.168.100.101~150. 192.168.100.111 is the wired network IP

factory default of single detector.

7.1.2. Initial Connection Setting

Check Show Network Window message before connecting. Click Connect and then IP and PORT

window will appear.

Select network window

This is to set up connecting ports between PIXX and the workstation computer.

IP address: Set the IP address for detector.

Port number: Set the PORT number for detector