Users Manual

Install & Service Manual AT-SM-04
Prudent │ Flat-panel Digital X-ray Detector Rev.1.0.8
ⓒ 2020. PIXXGEN Corporation. All rights reserved. -22-
4.1.2.1. Initial Connection Setting
Check Show Network Window message before connecting. Click Connect and then IP and PORT
window will appear.
Select network window
This is to set up connecting ports between PRUDENT and the workstation computer.
IP address: Set the IP address for detector.
Port number: Set the PORT number for detector
Tip!.
For the initial operation of Sensorprobe, follow the instructions thoroughly.
After setting up IP and PORT once, the users may easily perform connection
by clicking ‘Connect’ afterward unless Router changed or initialized.