Prudent Digital X-Ray Detector : Users Manual : Page 2

Install & Service Manual AT-SM-04

Prudent │ Flat-panel Digital X-ray Detector Rev.1.0.8

INTRODUCTION

PRUDENT is a high-resolution digital X-ray imaging device commonly referred to as a flat panel detect. A

built-in a-Si TFT flat panel type digital sensor receives X-ray and converts to digital image. X-ray photons are

converted to digital output signals. The digital signals are then read out by TFTs. The image data file is saved

at the computer for display, which can be linked with PACS and printed by DICOM printer through acquisition

software. It is specifically designed to deliver x-ray imaging for medical, veterinary and industrial applications.

ATTENTION

1. This manual guides the PRUDENT user to perform all installation and set-up procedures. Be sure that

the user reads this manual thoroughly.

2. This includes the instructions of NETWORK card installation.

3. The use of calibration data and the method of creating calibration data are demonstrated.

4. Guidelines for the manual mode when connecting the generator directly to the PRUDENT is included.

5. No Modifying warning statement

Never disassemble or modify the product as it may result in fire or electric shock. Also, since the

instrument incorporates parts that may cause electric shocks and other hazardous parts, touching

them may cause death or serious injury

6. FCC 15C Compliance statement

Any Changes or modifications not expressly approved by the party responsible for compliance could

void the user's authority to operate the equipment.

7. RF Exposure SAR statement

RF exposure compliance

The available scientific evidence does not show that any health problems are associated with using

low power wireless devices. There is no proof, however, that these low power wireless devices are

absolutely safe. Low power wireless devices emit low levels radio frequency energy (RF) in the

microwave range while being used. Whereas high levels of RF can produce health effects (by heating

tissue), exposure of low-level RF that does not produce heating effects causes no known adverse

health effects. Many studies of low-level RF exposures have not found any biological effects. Some

studies have suggested that some biological effects might occur, but such findings have not been

confirmed by additional research. This device has been tested and found to comply with FCC/IC

radiation exposure limits set forth for an uncontrolled equipment and meets the FCC radio frequency

(RF) Exposure Guidelines in Supplement