User's Manual

User Manual v1.6 10
Printed copies of this document are uncontrolled
5.4 Mounting the Reader
5.4.1 Location of mounting holes on wall
5.4.2 Reader Installation Steps
● Make two holes on the wall as per the image above corresponding to the type of reader.
● Insert the nylon screw plugs into the wall.
● Connect the wires as per the Table in Section 5.3.1
● Proxy Reader® Mullion Wall Plate is to be secured onto the wall using the Screws (A)
● Proxy Reader® Mullion Main Housing can be installed onto Wall Plate
● Secure the Main Housing to the wall plate using Security Screw (B)