User's Manual


Power Up and Testing
1. Turn power on.
● Indicator Light (top of housing)powers on and turns RED.
● Branding LEDs turn on (Proxy Logo Displayed).
2. Present a card.   
● Access Granted: The Indicator LED blinks green, and a short beep is emitted.
● Access Denied:This is dependent on Access controller configuration. 
3. Present a Phone with Proxy ID App Enabled.
● Access Granted: The Indicator LED blinks green, and a short beep is emitted.
● Access Denied: This is dependent on Access controller configuration.
This is the default reader behavior.




| 12
