Brochure

223
The KT 70, small and accurate.
Ideal for MICROMOT drill stand and drill press TBM 220.
The step clamps set is supplied with the KT 70, but can also be
ordered separately. Set consists of 2
stepped blocks and clamping jaws
threaded bolts, screw nuts and slot nuts
of the MICROMOT standard. For work
pieces up to 20mm thickness.
NO 24 256
Precision vice FMZ with integrated clamp
Rotates in all directions. Made of die-cast zinc.
Easily clamps to workbenches and tables of up to 60mm. Alternatively,
use 2 standard screws to secure to the work surface. Ball and socket:
rotates in all directions (even downwards). 75mm jaws with protective
covers (for delicate workpieces). Maximum clamping width 70mm and
weight 1.6kg.
NO 28 608
Precision vice FMS 75
As detailed above, but without clamp.
A strong suction cup facilitates instantaneous fixing to any smooth,
flat surface.
NO 28 602
Made of solid aluminium with surface treatment and fitted with
adjustable dovetail gibs and three T-slots of the MICROMOT stan
-
dard (12 x 6 x 5mm). Adjustable ruler eases workpiece positioning.
Both handwheels have zero-resettable dials with graduations indica-
ting 1 revolution = 1mm and 1 division = 0.05mm. The clamps and
securing bolts for the MB 200, MB 140/S and TBM are included.
Other technical data:
Table size 200 x 70mm. X travel 134mm and Y travel 46mm,
maximum height 43mm.
NO 27 100
MICRO compound table KT 70
Step clamps made of steel
Table of 200 x 70mm
with 3 T-slots.
Two step clamps
are included.
Moveable ruler eases workpiece
positioning.
Note:
The MICRO compound table KT 70 is now
also available as KT 70/CNC-ready (with two
stepping motors for the axes X (transverse)
and Y (lengthwise). You will find it on page 52.
Handwheels with
adjustable dials
(1 revolution = 1mm,
1 division = 0.05mm).