User manual

-25-
1. Hold on to the handwheel 1and release the cap nut 2.
2.
Turn the handwheel slightly to the right.
3. Retighten the cap nut while still holding the handwheel.
Please
consider hereaswell:
The
complete elimination of the backlash and atoo "tight"
adjustment for the handwheels is unreasonable: If the hand-
wheels
areset too closely,this causes higher operating forces
as well as increased wear hereaswell!
Disposal:
Please do not dispose of the device in domestic waste! The
device
contains valuable substances that can be recycled. If
you have any questions about this, please contact your local
waste management enterprise or other corresponding munici-
pal facilities.
EC Declaration of Conformity
Name and address:
PROXXON
S.A.
6-10, Härebierg
L-6868 Wecker
Product designation: PD 250/E
Article
No.: 24002
In
sole responsibility,wedeclarethat this product conforms to
the following directives and normative documents:
EU EMC Directive 2014/30/EC
DIN EN 55014-1 /05.2012
DIN EN 55014-2 /06.2009
DIN EN 61000-3-2 /03.2015
DIN EN 61000-3-3 /03.2014
EU Machinery Directive 2006/42/EC
DIN EN 61029-1 /01.2010
Date: 17.10.2016
Dipl.-Ing. JörgWagner
PROXXON S.A.
Machine Safety Department
The CE document authorized agent is identical with the
signatory.