User`s manual

Sleep Mode

Press the SLEEP button, the display will then blink intermittently.

Continue to press the button until the display shows the time you

would like to set. It is possible to set from 10 to 90 minutes.

The display will blinks three times to confirm the sleep setting, and

then return to the interface. If you want to cancel the sleep mode,

press the SLEEP button until 00 is read on the display. After it blinks

three times, the sleep mode will be cancelled.

Playing Music on your iPhone or iPod

1. Ensure the power switch on the rear of the speaker is ON.

2. Press and hold the function button until the red light below the

iPhone/iPod dock illuminates.

3. Dock your iPhone or iPod to the device.

4. Press the play/pause button on the unit or on the remote control to

begin playing music from the docked iPhone or iPod.

Using the Line-In or AUX Input

Analogue sound signals from other sources can input to the speaker.

Press the AUX button on the tower or repeatedly press the source

button on the remote control until the display reads AUX or LIN.