Specifications

Using the Lightbook Projector

2-7

Setup

Press the

Setup

key to display a series of Setup menus. The projector will

display the slide bars in sequence to help you adjust the image. For example,

if you are connected to a computer source, the SETUP key will cycle through

slide bar adjusters for Contrast, Sync, and Image Position.

NOTE: If no video source is present, the Help screen will appear when you

press Setup.

Contrast

Figure 2-10 Sample Setup slide bar

Press or to adjust the selected item. Press

Setup

again to accept the new

setting. The display disappears after five seconds if no actions are taken.

NOTE: The Setup options will be different for each type of input source.

SETTING PURPOSE AVAILABLE ON

Sync Fine tune the clarity of the image. Computer only

Contrast Sharpen the image. All sources

Brightness Increase/decrease brightness. Video

Image Position Move the image left or right and up or Computer,

down. PAL/SECAM video in

full scale model with

Fit-To-View turned

off (see page 2-20)

Tint Changes the color tones. Video

Saturation Increase/decrease color. Video

Pixel Skip Adjusts the image for text mode. Computer Text

mode only