Specifications

Setting Up the Lightbook Projector 1-5
CONNECTING YOUR COMPUTER
Connecting Notebook Computers
Use the appropriate cable and adapter to connect your notebook computer
to the projector.
Computer InSerial S-Video Video In
L
R
In–Audio–Out
Monitor Out
MAC II
CPU
Video
Output
Port
MAC - VGA
Adapter
VGA Cable
Computer
In Port
Figure 1-6 Notebook connections
NOTE: If you are using an Apple PowerBook, attach the Mac - VGA cable
adapter to the computer’s Video Output port (or video adapter cable).
1 Plug the end of the supplied VGA cable with the large round collar into
the computer’s VGA or Video Out port or into the Mac - VGA cable
adapter (Macintosh only).
2 Plug the other end of the VGA cable into the COMPUTER IN port on the
projector.
3 If you want audio, connect your audio source to the AUDIO IN port on
the projector.
4 Turn the projector on.
NOTE: If your projector is unable to project an image at the same time your
laptop monitor displays an image, refer to your laptop documentation for
information on switching between the internal screen and the video port.