- Sony Digital Still Camera Operating Instructions

masterpage:Right
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\10add.fm]
Additional information
69
model name1[MVC-CD1000]
[3-062-473-12(1)]
The flash does not work. • The flash is set to .
t Set the flash to (no indication), , or
(page 22).
• The camera is in one of the following PROGRAM
AE modes: Twilight, Twilight plus, or Landscape.
t Cancel the PROGRAM AE function or set the
flash to (page 22, 51).
• The PLAY/STILL/MOVIE selector is set to
MOVIE.
t Set it to STILL.
• The flash is not popped up.
t Popuptheflash(page22).
The date and time are
recorded incorrectly.
• The date and time are not set correctly.
t Set the correct date and time (page 12).
Vertical streaks appear
when you are shooting a
very bright subject.
• This is called the smear phenomenon.
t This is not a malfunction.
The battery life is short. • You are recording/playing back images under
extremelycoldtemperatures.
• The battery pack is not charged enough.
t Charge the battery pack fully.
• The battery pack is dead.
t Replace the battery pack with a new one.
The indication of the
battery remaining time is
not proper.
• You are using the camera for many hours under
extremely hot or cold temperatures.
• The battery pack is dead.
t Replace the battery pack with a new one
(page 8).
• The battery level is too low.
t Install the charged battery pack (page 8, 9).
The power is immediately
turned off even if the
battery remaining
indicator indicates that the
battery level is sufficient.
• —
t Charge the battery pack about one hour after the
normal charge is complete (page 9).
The zoom does not work. • PROGRAM AE is set to the Panfocus mode.
t Cancel the Panfocus mode (page 51).
Digital zoom does not
function.
• You cannot use digital zoom to record moving
pictures.
Symptom Cause and/or Solution
01cov.book Page 69 Wednesday, July 19, 2000 10:33 AM