User's Manual
Table Of Contents
- COPYRIGHT
- TRADEMARKS
- FCC COMPLIANCE
- Chapter 1. Overview
- Chapter 2. Installation
- Chapter 3. Management Overview
- Chapter 4. Basic Management
- Chapter 5. Web Interface
- Chapter 6. Command Line Interface
- Chapter 7. Procedures
- Appendix A. Specifications
- Appendix B. Troubleshooting
- Appendix C. Support and Contacts
- Glossary
Tsunami MP.11and MP.11a Installation and Management
2) Upload
Click the Commands button and the Upload tab to upload a configuration file from the MP.11/a.
3) Reboot
Click the Commands button and the Reboot tab to restart the embedded software of the MP.11/a.
Configuration changes are saved and the MP.11/a is reset.
CAUTION: Rebooting the unit causes all users currently connected to lose their connection to
the network until the MP.1/a1 has completed the restart process and resumed
operation.
Chapter 5. Web Interface 77
CPN 65755 Issue Date: August 2003