User`s guide

LED Indicators

There are three LEDs on the front of the RangeLAN2 Access Point:

❑ The cornermost LED, called the Status LED, changes from yellow to green to indicate

it is forwarding packets and functional. It changes from yellow to red if there is a

hardware problem with the unit. If this LED does turn red, contact Proxim Techni-

cal Support. The LED will blink yellow if the Access Point has switched to the

Error Domain because the 10BaseT Link Monitor is enabled and cannot detect a

10BaseT Ethernet connection.

❑ The center LED, called the Radio LED, flashes yellow when the Access Point

transmits wirelessly.

❑ The third LED, called the Backbone LED, flashes green when the Access Point

transmits over the Ethernet.

Figure 15

Front Panel LEDs

Status LED

Radio LED

Backbone LED