User`s guide

The higher the Link Quality number from a particular node, the greater the link. A Link

Quality number of 0 indicates that the node is no longer responding at all. This is the

most important parameter to watch to verify that you will be able to maintain a reliable

wireless connection. Note that the Link Quality number of RangeLAN2 7200 and

7400 adapters may be low if those adapters are in their doze mode when being

surveyed. As these adapters wake up, the Link Quality number may change, so

this number may not always be accurate.

Received signal strength (RSSI) indicates how strong a signal was received from a particular

node.

After using the Broadcast Site Survey, you can choose the Run Directed Site Survey to

check the packets per second and bytes per second measurements between the

RangeLAN2 752x Access Point and the node you select.